Standard plate clamps with safety lock
Working load limit (WLL) 50 – 3000kg
These clamps are primarily used for transporting sheet metal and steel plates in the vertical position, as well as lifting and rotating through 180°
They can also be used for transporting steel constructions and profiles. It is recommended to use a pair of plate clamps in conjunction with a spreader beam for long plate.
Function
The jaw is opened and closed with the locking lever, except for the 92-500 which uses a positive spring-loaded cam.
The safety lock spring loads the cam jaw, preventing the clamp from opening even when there is no load on the jaw.
Workmanship and parts
These plate clamps are service-friendly, making it easy to exchange parts, which are readily available. Clamp repairs are available through the factory, or can be done by a competent person.
NB: The plate surface of the material being clamped must have a hardness level below HRC 30/Brinell 300.
These are supplied as standard with a hook ring. Link fitting and chain are available as a special order, please contact us if this is what you need
Reviews
There are no reviews yet.